Custom configuration

We offer a plug-and-play interface between the Tinkerforge system of building blocks and IIoT platforms. The listed sensors and interfaces are fully integrated in all of our hardware and software products.

The following integrations or protocols are available at the moment: DAQORE, HELIO, HTTP, IXON and MQTT

Feel free to select the sensors and interfaces for your application. Please also fill in your contact information and a short description of your technical problem.

1-Wire

1-Wire interfaces are used to communicate with 1-wire capable devices. Up to 64 devices can be connected to the bus and used at the same time.

Acceleration

In addition to common multi-axis acceleration and pitch/roll angles, acceleration data can be put into a fast Fourier transform to determine the occurrences of specific frequencies for use cases like vibration monitoring.

Air pressure

Based on their internal temperature compensation, many air pressure sensors can also be used as altimeters.

Alternating current inputs

Alternating current inputs detect whether a conductor carries 230 V (AC) mains voltage.

Ambient Light

Illuminance measurements are commonly used for automation and control applications.

Ambient temperature

Temperatures measurements of gases like air have use cases in many industries and applications.

Barometer

Based on their internal temperature compensation, many barometers can also be used as altimeters. As air pressure is changing significantly even over a short period of time, sensor fusion with an inertial measurement unit is recommended for most applications.

CAN

CAN interfaces are used to send and receive data on a CAN bus to communicate with other CAN devices.

Capacitive touch

Detecting the locations of touch events through thin layers of glass, plastic or similar is often used in custom-built touch panels.

CO2 concentration

Compensated by temperature, humidity and air pressure, high-precision measurements of CO2 concentrations allow for condition monitoring of the global atmosphere as well as inside buildings, rooms or machines.

Color

Sensor fusion of color, color temperature and illuminance can be used to detect the color of objects. Sorting objects by their color, for instance, is one use case where color detection plays a major role.

Compass

To get a sense of direction, 3-axis magnetic flux density readings can be converted into heading and inclination angles. Use cases can be found in control applications, whenever direction or rotation needs to be detected.

Current inputs

Current inputs with measurement ranges between 0 mA and 22.5 mA are used as interfaces for IEC 60381-1 type 2 and type 3 sensors.

Custom sensor interface

Custom sensor interfaces can be used to integrate special sensors.

Digital inputs

Digital inputs with input voltages up to 36 V (DC) are used as interfaces for programmable logic controllers (PLC) or frequency converters.

DMX

Digital Multiplex (DMX) is a communication standard that is used to control lighting and effects in event technology. Controlling stage lighting dimmers, fog machines and effect equipment are example uses cases.

Frequency counter

Edge counters can measure duty cycle, period, frequency and the value for frequencies as high as 4 MHz. They count rising edges, falling edges or both. Example applications are reading of a PWM signal and interfacing sensors that have edge counts or frequency as output.

GPS

Global navigation satellite system such as GPS, GLONASS or Galileo allow for geo-spatial positioning on earth. They also provide data about movement, altitude as well as highly precise time/date information.

Humidity

Data about relative humidity in air is commonly used in drying applications, environment monitoring or in outdoor weather stations.

Indoor air quality

Sensor fusion of air pressure, humidity and temperature as well as gas measurements of ethane, isoprene, ethanol, acetone and carbon monoxide allows for calculating the indoor air quality index.

Inertial measurement unit

Attitude and heading reference systems use an inertial measurement unit with 9 degrees of freedom to measure angular rate, acceleration, and Earth's magnetic field. These measurements give an estimate of the object’s attitude.

Infrared distance

With accuracies in the millimeter range, infrared sensors are commonly used in robotics to measure distances for localisation and mapping tasks.

Infrared temperature

Contactless object temperature measurements have many use cases, especially because temperatures can be as high as 380 °C. Additionally, ambient temperature measurements are possible.

Isolator

Sensor modules that do analog/digital input/output benefit from galvanically isolating their power and data lines.

LIDAR

LIDAR sensors measure distances and velocity with laser pulses and the time-of-flight principle.

Load cell

Calibrated with a single known weight, load cells allow for measuring weight differences of a few grams in big objects that weigh many kilograms.

Magnetic flux density

Sensors for magnetic flux density measure the strength and count the appearances of magnetic fields in scenarios where rotational speeds of wheels or rotating objects should be detected, for instance. Rotational speeds of up to 10 kHz can be detected.

NFC

Near field communication (NFC) has become part of our everyday life, as it's the technical basement for contactless payment with smartphones smartwatches. It is commonly used for keyless access and identification applications.

NH3

A sensor fusion of NH3 concentration (ammonia), air temperature and humidity enables uses cases such as livestock farming and gas leaking detection for heavy industry and atmospheric environmental gas detection.

Particulate matter concentration

Detecting particulate matter concentrations and particle sizes in the air is not only used in medical applications, but also in clean rooms and the microsystems industry.

Passive infrared motion

Passive infrared sensors have detection ranges of more than 10 meters and can be used to detect movement of people, animals and objects in general.

Power, voltage and current

Measuring power, voltage and current of a load (e.g. motor) is one of the potential use cases. In case of battery powered systems, it determines the state of the battery by bidirectional current measurement (charge/discharge).

PTC

Pt100 and Pt1000 are just two examples of industrial resistance temperature detectors which provide very high detection ranges and accuracy.

RS-232

RS-232 interfaces are used to send and receive serial data with RS-232 to communicate with other serial devices.

RS-485

RS-485 interfaces are used to send and receive differential data with RS-485 to communicate with other serial devices.

Sound pressure level

Detection of the current sound pressure level and frequency spectrum enables to measure loudness of music and environmental noises.

Thermal imaging

Thermal imaging cameras generate a two-dimensional heat map including minimum, mean and maximum temperatures of the pictured object.

Thermocouple

There are different thermocouple types used in science and industry which all produce a temperature-dependent voltage as output signal.

Ultrasonic distance

Distance measurement with ultrasound is used in robotics, automation and control applications with resolutions up to 1 mm.

Ultraviolet light

Ultraviolet light sensors us UV measurements to calculate the UV index. Common applications of UV light sensors are sunscreen warning and environmental data logging.

Voltage inputs

Voltage inputs with measurement ranges between -35 V and 35 V are used as interfaces for IEC 60381-2 sensors.